First I want to say thanks for such quick shipping of the product to Canada, second I want to let you know how pleased I am with the general quality of everything (everything appears to be of great quality). Your instructional video has been awesome (excellent detail & explanation), however I have run into a glitch while installing the wires from the relay to the 20amp outlet. I have a 2016 canadian model and the wiring is different than on your supplied usb video and I just checked your website (video is the same). I actually have 2 red wires going to the upper end and 1 red wire going to the lower end on the 1 side of the 20amp plug in (your video only shows 1 red wire), there is also no existing jumper between these 2 connections (your video stated there should be one there that I should be removing). Since this is a brand new generator I do not want to take any chances and am therefore requesting your assistance in what I should be doing. Attached is a couple photos for reference. Thanks
Reply From Paul Wolaver
Yes this is correct. The Canada model units are actually easier to install due to the fact that they have a separate breaker for each outlet. This is all you will need to do. Remove the wire that runs from the breaker to the outlet that you want to control, then put the blue wire from my kit where one end of that wire was, then put the red wire of my kit where the other end of that wire was. you will need to change the end on the wire that you put on the breaker. It is that easy.